CCTV Systems

Pelco Sarix IX30DN

Megapixel IP-camera Sarix IX30 Series with two video streams H.264/M-JPEG up to 30 k / s, PoE and MiniSD-slot

3.1-megapixel model IX30 company Pelco by Schneider Electric Sarix use technology and are designed for IP-Surveillance with a high degree of image detail. The composition of this series is IX30C color camera and a model “day and night» – IX30DN. Both models feature a 1/3-inch CMOS sensor with progressive scan, support the function of WDR, AF (ABF) technology and PoE, and also have alarm input / output and a slot for MiniSD. In light of up to 0.2 / 0.05 lux, these IP-cameras on the network can broadcast high quality video in H.264 and / or M-JPEG with a resolution up to 2048×1536 pixels. and up to 30 k / s. To adjust the video settings and manage IX30 can use any Web browser or software Pelco Endura and Digital Sentry.

Color IP-camera and model IX30C IX30DN «Day / Night” differ from other models range Sarix-Based IX of Pelco by Schneider Electric highest megapixel resolution. They use proprietary technology Sarix ™ and have the optimal balance of high resolution and minimum illumination at which the possible transmission of high-quality video. Furthermore, both IP-camera support functions to improve image quality, including an extended dynamic range (WDR), automatic white balance (AWB), backlight compensation and electronic shutter speed controls.

Stable operation of the camera in a constantly changing light
All megapixel models Sarix-Based IX operate over a wide dynamic range (WDR) to 60 dB and have a signal / noise ratio of up to 50 dB. They are able to pass on the IP-based networks detailed and clear color video with the natural color or monochrome image, including those in low-light video surveillance at the facility. For example, IP-camera “day-night” with a movable IR cut filter in color mode at up to 1 lux of illumination, and in black and white – to 0.2 lux. In addition, each model is able to use IX30 frame accumulation mode (Sense-UP), which increases the sensitivity of the camera 5 times.

Simultaneous transmission of video streams in H.264 and M-JPEG
Depending on the tasks of surveillance cameras IX30 can be configured to IP-based network to one or two simultaneous video streams in H.264 and / or M-JPEG with options for aspect ratio of 4:3, 5:4 and 16:9. You can choose the parameters of the first stream, and characteristics of the second will depend on the configuration of the first. To make effective use of channels with wide or narrow bandwidth IP-camera video streams to form a different resolution, frame rate and the structure of GOP (Group of Pictures). For example, M-JPEG with a maximum resolution of 3MP frame rates up to 10 k / s, and the frame format for HDTV 720p (1280×720 pix.) – Up to 30 k / s.

Support for PoE, and used the power supply
Like other rulers megapixel cameras Pelco Sarix, IX30C IX30DN and can be powered by “twisted pair” Category 5, for which the management of the video signal and transmitted, as they offer support for Power over Ethernet (PoE) standard IEEE 802.3af. This allows IP-camera in a convenient place for the review, regardless of the distance to the source. Alternatively, you can apply power directly to the camera from an AC source with a voltage of 24 V.

Ability to record and store video on a MiniSD card format
All cells of the family Sarix-Based IX, including the IX30, equipped with alarm input for connecting an external security sensors and relay outputs to control external actuators. At the same IP-camera equipped with a slot for removable memory cards MiniSD, which can record both the current and disturbing videos.

Local / remote configuration and management SarixIX30 through a web browser
Unlike a number of unique, IP-cameras in this series have the function of the back focus adjustment Auto Back Focus, which allows them to automatically select the focus when you press a separate button. Due to the ABF, and the availability of video-out service, IX30 can be set directly on the site. In addition, a megapixel camera equipped with a Web server, so they can be installed remotely via IP-based networks. Web-based IX30 allows you to combine a network of up to 16 devices simultaneously, with the ability to manage through a web browser.

Management IX30 and video streams as part of a major IP-video systems
Support for application software components API simplifies the integration of IP-megapixel cameras in Pelco software applications from third parties. However, they are fully compatible with software for video Pelco Endura and Digital Sentry, each of which allows for video monitoring, recording and management of network cameras and other IX30 Pelco, and also provides the operator with enhanced capabilities for IP-CCTV, including the optimization of video quality and organization of data storage.

Wide choice of lenses for a series of Pelco Sarix
Each color / ‘day-night »IP-IX30 camera gives installers the freedom to choose the most suitable to the characteristics of the lens. This can be Megapixel Lens Pelco or, for example, marks Fujinon, Computar, SpaceCom, etc. The developers recommend the use of lenses with auto iris and CS-type mount. To control the iris using a standard 4-pin connector.

Simple and quick to install IP-camera on the bracket or ThermoJacket
Depending on the location that will be allotted at the facility IX30 IP-Surveillance to install it, you can choose all the necessary accessories. When installed in the room, the camera can be mounted on a metal bracket universal Pelco C10-UM and fixed screw UNC-20 1/4 “from the top or bottom. To work in outdoor environments, or in a damp location megapixel camera should be placed in housings, for example, Pelco EH1512 or EH3512.

The main technical characteristics of megapixel IP-cameras Pelco IX30C/IX30DN

Sensor: 1/3-inch CMOS-matrix, progressive scan
Compression standards: H.264 Motion JPEG
Max Resolution: 3MP (2048×1536 pixels).
Video streaming: Simultaneous transmission of up to two streams
Transmission speed: M-JPEG:
to 30 k / s at 1280×720 pixels.;
to 15 k / sec at 1920×1080 pixels.
H.264:
to 12.5 c / s at 1280×720 pixels.;
6 c / s at 1920×1080 pixels.
Sensitivity of IP-cameras: f/1.2, 2800K, SNR> 24 dB
Color.: 1.00 lux (1h/33 ms);
Color. SENS: 0,20 lux (15h/500 ms) f/1.2, 2800K, SNR> 24 dB
Color.: 1.00 lux (1h/33 ms);
Color. SENS: 0,20 lux (15h/500 ms);
B / w.: 0.20 lux (1h/33 ms);
B / w. SENS: 0,05 lux (15h/500 ms)
Mode “day-night”: No mechanical IR cut filter
Electronic shutter: with 1-1/10000
Wide dynamic range (WDR): 60 dB
White Balance: 2,000 º to 10,000 º K; AWB / MWB
BLC: On. / Off.
S / N Ratio: 50 dB
Autofocus IP-cameras: Auto Back Focus (ABF)
Lens Mount: CS
Office of iris: DC
Local storage: Built-in memory card slot MiniSD
Alarm Input / Output: 1/1
Connect to IP-based networks: Ethernet 100Base-TX, RJ-45, Auto MDI / MDI-X
Supported network protocols: TCP / IP, UDP / IP, IGMP, UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, MDNS (Bonjour)
Webmail: View up to 16 cameras via a web browser
Minimum system requirements for PC: PC (Pentium 4, 1.6 GHz)
Windows XP / Vista or Mac OS X 10.4 (or higher)
512 MB of RAM
Network Port 100 Mbps
Ethernet Microsoft Internet Explorer 7.0 (or higher) or Mozilla Firefox 3.0 (or higher)
The screen resolution of 1024×768 pixels. or higher, 16 or 32-bit color
Integration into the system Pelco: Endura 2.0 (or higher);
Digital Sentry 1.6 (or higher)
Multi-User Access: Up to 20 simultaneous users, unlimited in Broadcasting (H.264)
Network Security: Password protection
Fixing IP-cameras: UNC-20, 1/4 “, top / bottom surface of the housing
Service Video Out: Mini jack, 2.5 mm
Power supply: 24 V AC;
Power over Ethernet (PoE, IEEE 802.3af class Statement 3)
Power consumption: 6 W
Operating temperature and humidity: -10 ° … + 50 ° C;
Humidity 20-90% (no condensation)
Dimensions: 137x79x76 mm
Weight: 0,5 kg (without lens)